Skip to content

Procedure - Deleting a system that has been created twice

Determination - Example

An installation was deactivated on 20.10.2020 and a new installation was created on 11.11.2020 with the same installation number. The current situation for the user is that an old system has been deactivated and a new system has been installed with the system number of the old system.

Inspection by responsible refrigeration system builder

In the branch, an existing system was taken out of operation, i.e. the refrigerant was removed, converted and then refilled with refrigerant. The filling quantity of a system can only be determined in MobiLec via the Disassembly set to 0 kg. By mistake, the plant was then newly created instead of the old plant being Commissioning to activate again.

Troubleshooting by refrigeration contractor

A deactivated system that is to be put back into operation after a conversion or similar must be reactivated.

  • Make a note of all entries that have been made on the active, doubly created system and then delete them if they exist. The Refrigeration engineer can only make these adjustments retroactively for a defined time, after which the Advisor to contact.
  • The active, doubly created plant is to be deleted.
  • The deactivated unit is equipped with a Commissioning with the corresponding filling quantity.
  • The noted entries are to be updated for the old, reactivated system. Where appropriate, the dates of the entries shall be indicated by the Advisor backdate.